GAS CONTROL PANEL
Rhino 103 Control Panel
(TS-RHINO 103) - Extinguishing Panel
Technoswitch Rhino103: A robust extinguishing control panel compliant with EN54 and EN 12094, featuring a sleek design, outdoor adaptability, and advanced features like programmable relays and a 1,000 event log.
GAS CONTROL PANEL
Rhino 103 Control Panel
The Technoswitch RHINO103 Extinguishing Control Panel is designed for robust commercial and industrial fire solutions, compliant with EN54 parts 2 & 4 and EN 12094, with third-party testing confirmation.
Housed in a sleek ABS enclosure, the standard RHINO103 panels are perfect for commercial use and are easy to install. For outdoor or industrial settings, weatherproof enclosures are available, with details in the RHINO103 Weatherproof datasheet.
RHINO103 Repeater Panels, available in ABS or weatherproof casings, replicate the master panel’s alarm indicators. Up to seven can be wired in a “ring” configuration without built-in power supplies, and each has a manual release point.
With an AC input range of 100 V AC to 240 V AC, the integral switch mode power supply is adaptable for fluctuating mains. It can connect to 7 Ah batteries.
Each panel has three zones, supporting 32 devices each. Zones can trigger a single extinguishant output and can be set as intrinsically safe.
The panels feature General Fire and Fault Relays, programmable relays, sounder circuits, monitored inputs, and a dedicated hold input. The SOLAR software enhances programmability, and maintenance is made easy with features like a one-man walk-test, a 1,000 event log, and status LEDs for fault identification.
GAS CONTROL PANEL
Features
- 3 Zones; any combination can be configured for double-knock
- Onboard manual release call point
- USB port for event log download
- 1,000 event log
- Three programmable relays
- One programmable monitored input
- One dedicated hold input
- Three monitored sounder circuits
- IS zone compatible
- Walk-test
- Service/commissioning switch
- Key switch for user-level access control
- Connection of up to seven repeater panels
- SOLAR programming software
- 3-year warranty
- Repeater panel range available
- Weatherproof panel and repeater versions in a mild steel IP65 enclosure available
GAS CONTROL PANEL
Specifications
- Enclosure
- Environmental
- Humidity
- Dimensions (H × W × D)
- Weight (excl Batteries)
- Cable Entries
- Key Switch
- Event Log
- Mains Supply
- Power Supply
- AUX Supply Output
- Battery Capacity
- Battery Charging Current
- Number of Fire Zones
- Zone EOL
- Zone Alarm Threshold
- Sounder Outputs
- Sounder EOL
- Extinguishant Output
- Countdown Auto or Manual Time
- Release Time
- General Fire Relay
- General Fault Relay
- Programmable Relays
- Programmable Input
- EOL
- Alarm Threshold
- HOLD Input
- L-Bus Topology and Distance
- Number of Repeaters on L-Bus
- ABS: Two-tone (White lid with Anthracite Grey RAL 7016 base)
- –5 °C to 40 °C
- 95% RH, Non-condensing
- 270 × 330 × 125 mm
- ± 2.1 kg
- Top: 6× 20 mm, 5× 25 mm; Back: 4× 20 mm, 2× 25 mm
- Enable Controls; Extinguishing Control (Auto & Manual / Manual Only)
- 1,000 Logged events
- 100 to 240 V AC (± 10%), 50/60 Hz, 1.0 A max
- 27.5 V DC, Switch Mode, 1.2 A load, 0.5 A max battery charging
- 27.5 V DC, 0.2 A
- 24 V DC, 7 Ah
- 0.5 A max temperature compensated
- 3
- 3k3 Ω
- 220 to 900 Ω (Nominal 680 Ω)
- 3× Rated at 27.5 V DC, 0.15 A each
- 3k3 Ω
- 27.5 V DC, 1A programmable for Metron, Solenoid and Aerosol
- Programmable 0 to 60 seconds
- Programmable 10 to 300 seconds
- 30 V AC/DC, 1 A maximum
- 30 V AC/DC, 1 A maximum
- 3 relays rated 30 V AC/DC, 1 A maximum
- 1 Fully monitored
- 3k3 Ω
- 220 to 900 Ω (Nominal 680 Ω)
- 1 Fully monitored
- RS485 ring network @ 1,200 metre max
- 7 (Seven)
